These realistic stones are handmade of high-density casting plaster. Cast in solid colors so that when trimmed, the edges do not show white, but rather their natural color. They can be easily cut with an X-acto knife by scoring the surface and snapping at the score. Each bag covers approximately 100 square inches. To finish the stones shown above follows these instructions. Stones should be glued in place with #1250 Weldbond or your favorite adhesive and allowed to dry. Then the stones should be sealed with a non-yellowing sealer (for example, Delta Ceramcoat satin varnish) and allowed to dry. This helps protect the stone from the slightly abrasive mortar. Apply #2076 Mortar Mix between the stones. Add a top coat of sealer, if desired. Instructions included with stones. Largest stone: 1″ x 1/2″
Make sure this fits by entering your model number.
Unless noted otherwise, this item is 1/12 (1″, 1:12) scale. The products we sell are intended for use by miniaturists, miniature collectors, crafters and others with an interest in creating, accessorizing or constructing dollhouses and miniatures scenes.
Our products are not playthings and are not meant for anyone under the age of 14 years. These items are intended for adults to use in the construction and accessorizing of dollhouses and similar projects. Use by children under the recommended minimum age could present choking and other hazards. Parental supervision is strongly advised.